Skip to content
Dammam · Hotel · Large building · cooling tower

Fault

Loading the 3D view…

Click a part to zoom in on it and see its readings. Drag to turn the 3D view.

Tue 13 Jul · 01:00

1× is real time

Fault started: 12 Jul, 09:00

Live readings

Last reading 00:47 · every 15 minutes

  • Roof air (weather data)30.8 °C

Fault drill

Run a drill: start a fault and check that the rules (S1–S9) or the AI layer (S10–S12) find it.

Tank levels

Last 24 hours, readings every 15 minutes

  • Ground tank
  • Roof tank
Pump running

Minutes the pump ran in each 15-minute reading

Cooling tower water

Make-up and drain flow, m³ per hour

  • Make-up
  • Drain
Closed loop top-up

New water into the closed loop, m³ per hour

AI insights

AI adds what the rules cannot do: small, slow problems and forecasts. It never replaces the rules.

Each model learns from this building's own history.

Early warning

AI

Learns this building's normal night and flags small, slow leaks the rules miss.

AI model
OKScore 0.7 · warning line 5

Nights look normal. The quietest flow at night is within the learned range.

Night flow above normal, 01:00–05:00

litres an hour above the learned normal; shaded: normal range from 28 nights

  • Above normal
  • Normal range

Busy nights (hotels) hide small leaks; this model is surest in buildings with quiet nights.

Pump health

AI

Reads the pump's current and spots wear, clogging or dry running before the pump fails.

AI model
OK

Current is normal: 0.3 % from the learned value.

Mean running current each day

Amperes; straight-line trend over the last 14 days

  • Current
  • Trend
  • Trip level

Tank forecast

AI

During a supply cut, predicts how many hours of water are left, so the owner can order a water tanker in time.

AI model
OK

City supply is flowing. The forecast starts when a cut is seen.

If the city supply stopped now, the stored water would last about:

43 hours

Range 37–56 hours · AI

From the water in both tanks and this building's learned hourly use.

  • Water meter: 0.0 m³/h
  • Pipe from meter to tank: No direct reading
  • Ground tank: 90 %
  • Transfer pump: Off
  • Riser pipe: No direct reading
  • Roof tank: 57 %
  • Pipes inside the building: No direct reading
  • Cooling tower: Make-up flow 0.4 m³/h
  • Chiller: No direct reading
  • Closed chilled-water loop: Top-up flow 0.05 m³/h
  • Loop top-up tank: No direct reading
  • Fault: Leak in the closed cooling loop (12 Jul 2027, 09:02)